Skip to content
Snippets Groups Projects
Commit 273988c1 authored by Beat Küng's avatar Beat Küng Committed by Daniel Agar
Browse files

SITL: move all models to unified rcS startup and remove old scripts

parent 5ebd0116
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 3 additions and 896 deletions
posix-configs/SITL/init/lpe/iris_1 deleted 100644 → 0
+ 0
− 86
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_SYS_ID 1
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SITL_UDP_PRT 14560
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/iris_2 deleted 100644 → 0
+ 0
− 86
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_SYS_ID 2
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SITL_UDP_PRT 14562
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14558 -r 4000000
mavlink start -x -u 14559 -r 4000000 -m onboard -o 14541
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14558
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14558
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14558
mavlink stream -r 50 -s ATTITUDE -u 14558
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14558
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14558
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14558
mavlink stream -r 20 -s RC_CHANNELS -u 14558
mavlink stream -r 250 -s HIGHRES_IMU -u 14558
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14558
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/iris_irlock deleted 100644 → 0
+ 0
− 93
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.13
param set MPC_XY_P 1.2
param set MC_PITCHRATE_MAX 150
param set MC_ROLLRATE_MAX 150
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SDLOG_DIRS_MAX 7
# GPS only mode
param set LPE_FUSION 145
param set LPE_EPH_MAX 5
# enable fusion of landing target velocity
param set LTEST_MODE 1
param set PLD_HACC_RAD 0.1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
landing_target_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -u 14556 -r 4000000
mavlink start -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/iris_opt_flow deleted 100644 → 0
+ 0
− 101
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.3
param set MC_PITCHRATE_P 0.3
param set MC_PITCH_P 5.5
param set MC_ROLL_P 5.5
param set MC_ROLLRATE_I 0.1
param set MC_PITCHRATE_I 0.1
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.8
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.15
param set MPC_XY_VEL_I 0.2
param set SDLOG_DIRS_MAX 7
# changes for optical flow navigation
param set MC_PITCH_P 5.0
param set MC_ROLL_P 5.0
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_ROLLRATE_I 0.05
param set MC_PITCHRATE_I 0.05
param set MPC_ALT_MODE 1
param set LPE_T_MAX_GRADE 0
param set MPC_XY_VEL_MAX 2
param set MPC_Z_VEL_MAX_DN 2
param set MPC_TILTMAX_AIR 10
param set MPC_TILTMAX_LND 10
param set MPC_XY_P 0.5
param set MIS_TAKEOFF_ALT 2
param set NAV_ACC_RAD 1.0
param set CBRK_GPSFAIL 240024
# Flow-only mode
param set LPE_FUSION 242
param set LPE_FAKE_ORIGIN 1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/iris_rplidar deleted 100644 → 0
+ 0
− 83
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set LPE_FUSION 242
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
rgbledsim start
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sleep 1
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_w.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/plane deleted 100644 → 0
+ 0
− 88
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 1
param set SYS_AUTOSTART 3033
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_DPRES_OFF 0.001
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set NAV_ACC_RAD 15.0
param set NAV_LOITER_RAD 50
param set MIS_LTRMIN_ALT 30
param set MIS_TAKEOFF_ALT 30
param set SDLOG_DIRS_MAX 7
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set FW_THR_IDLE 0.15
param set FW_LND_ANG 8
param set FW_R_TC 0.7
param set FW_RR_FF 0.20
param set FW_RR_I 0.02
param set FW_RR_P 0.22
param set FW_P_TC 0.5
param set FW_PR_FF 0.40
param set FW_PR_I 0.05
param set FW_PR_P 0.05
param set FW_W_EN 1
param set RWTO_TKOFF 1
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
navigator start
local_position_estimator start
fw_pos_control_l1 start
fw_att_control start
land_detector start fixedwing
mixer load /dev/pwm_output0 etc/mixers-sitl/plane_sitl.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/rover deleted 100644 → 0
+ 0
− 84
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
dataman start
param set BAT_N_CELLS 3
param set CAL_ACC0_ID 1376264
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_ID 1310728
param set CAL_ACC1_XOFF 0.01
param set CAL_GYRO0_ID 2293768
param set CAL_GYRO0_XOFF 0.01
param set CAL_MAG0_ID 196616
param set CAL_MAG0_XOFF 0.01
param set COM_RC_IN_MODE 1
param set GND_L1_DIST 5
param set GND_SP_CTRL_MODE 0
param set GND_SPEED_D 3
param set GND_SPEED_I 0.001
param set GND_SPEED_IMAX 0.125
param set GND_SPEED_P 0.25
param set GND_SPEED_THR_SC 1
param set GND_THR_CRUISE 0.3
param set GND_THR_IDLE 0
param set GND_THR_MAX 1
param set GND_THR_MIN 0
param set GND_WR_D 1.2
param set GND_WR_I 0.9674
param set GND_WR_IMAX 0.1
param set GND_WR_P 2
param set MAV_TYPE 10
param set MIS_LTRMIN_ALT 0.01
param set MIS_TAKEOFF_ALT 0.01
param set NAV_ACC_RAD 0.5
param set NAV_DLL_ACT 0
param set NAV_LOITER_RAD 2
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set SENS_DPRES_OFF 0.001
param set SYS_AUTOSTART 50002
param set SYS_MC_EST_GROUP 1
param set SYS_RESTART_TYPE 2
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sleep 1
sensors start
commander start
land_detector start ugv
navigator start
ekf2 start
gnd_pos_control start
gnd_att_control start
mixer load /dev/pwm_output0 etc/mixers-sitl/rover_sitl.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/solo deleted 100644 → 0
+ 0
− 84
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 2
param set SYS_AUTOSTART 4010
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set COM_OF_LOSS_T 5
param set COM_OBL_ACT 2
param set COM_OBL_RC_ACT 0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 5.0
param set RTL_LAND_DELAY 5
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set SDLOG_DIRS_MAX 7
param set LPE_FUSION 247
# 11110111 no vis yaw (1 << 3)
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/quad_x.main.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/standard_vtol deleted 100644 → 0
+ 0
− 97
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 22
param set VT_TYPE 2
param set VT_MOT_COUNT 4
param set VT_F_TRANS_THR 0.75
param set SYS_AUTOSTART 13006
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set MC_ROLLRATE_P 0.3
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_XY_P 0.5
param set MPC_ACC_HOR_MAX 1.0
param set MPC_XY_VEL_P 0.1
param set MPC_XY_VEL_I 0.1
param set MPC_XY_VEL_D 0.005
param set MPC_Z_VEL_MAX_DN 1.5
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set FW_AIRSPD_MIN 14
param set FW_AIRSPD_TRIM 16
param set FW_AIRSPD_MAX 25
param set SENS_BOARD_ROT 0
param set SENS_DPRES_OFF 0.001
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set NAV_ACC_RAD 5.0
param set NAV_LOITER_RAD 50
param set MPC_TKO_SPEED 1.0
param set MIS_LTRMIN_ALT 10
param set MIS_TAKEOFF_ALT 10
param set MIS_YAW_TMT 10
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set COM_DISARM_LAND 5
param set MPC_ACC_HOR_MAX 2
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
measairspeedsim start
pwm_out_sim start
sensors start
commander start
land_detector start vtol
navigator start
attitude_estimator_q start
local_position_estimator start
vtol_att_control start
mc_pos_control start
mc_att_control start
fw_pos_control_l1 start
fw_att_control start
mixer load /dev/pwm_output0 etc/mixers-sitl/standard_vtol_sitl.main.mix
mavlink start -x -u 14556 -r 2000000
mavlink start -x -u 14557 -r 2000000 -m onboard -o 14540
mavlink stream -r 20 -s EXTENDED_SYS_STATE -u 14540
mavlink stream -r 80 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 80 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 80 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 80 -s ATTITUDE -u 14556
mavlink stream -r 80 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 80 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
mavlink boot_complete
replay trystart
posix-configs/SITL/init/lpe/typhoon_h480 deleted 100644 → 0
+ 0
− 83
View file @ 5ebd0116
#!/usr/bin/bash
# PX4 commands need the 'px4-' prefix in bash.
# (px4-alias.sh is expected to be in the PATH)
source px4-alias.sh
uorb start
param load
param set MAV_TYPE 13
param set SYS_AUTOSTART 6001
param set SYS_RESTART_TYPE 2
param set SYS_MC_EST_GROUP 1
dataman start
param set BAT_N_CELLS 3
param set CAL_GYRO0_ID 2293768
param set CAL_ACC0_ID 1376264
param set CAL_ACC1_ID 1310728
param set CAL_MAG0_ID 196616
param set CAL_GYRO0_XOFF 0.01
param set CAL_ACC0_XOFF 0.01
param set CAL_ACC0_YOFF -0.01
param set CAL_ACC0_ZOFF 0.01
param set CAL_ACC0_XSCALE 1.01
param set CAL_ACC0_YSCALE 1.01
param set CAL_ACC0_ZSCALE 1.01
param set CAL_ACC1_XOFF 0.01
param set CAL_MAG0_XOFF 0.01
param set SENS_BOARD_ROT 0
param set SENS_BOARD_X_OFF 0.000001
param set COM_RC_IN_MODE 1
param set NAV_DLL_ACT 2
param set COM_DISARM_LAND 3
param set NAV_ACC_RAD 2.0
param set RTL_RETURN_ALT 30.0
param set RTL_DESCEND_ALT 10.0
param set RTL_LAND_DELAY 0
param set MIS_TAKEOFF_ALT 2.5
param set MC_ROLLRATE_P 0.2
param set MC_PITCHRATE_P 0.2
param set MC_PITCH_P 6
param set MC_ROLL_P 6
param set MPC_HOLD_MAX_Z 2.0
param set MPC_Z_VEL_P 0.6
param set MPC_Z_VEL_I 0.15
param set MPC_XY_VEL_P 0.15
param set MPC_XY_VEL_I 0.2
param set EKF2_GBIAS_INIT 0.01
param set EKF2_ANGERR_INIT 0.01
param set EKF2_MAG_TYPE 1
param set SDLOG_DIRS_MAX 7
replay tryapplyparams
simulator start -s
tone_alarm start
gyrosim start
accelsim start
barosim start
gpssim start
pwm_out_sim start
sensors start
commander start
land_detector start multicopter
navigator start
attitude_estimator_q start
local_position_estimator start
mc_pos_control start
mc_att_control start
mixer load /dev/pwm_output0 etc/mixers/hexa_x.main.mix
mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
mavlink start -x -u 14556 -r 4000000
mavlink start -x -u 14557 -r 4000000 -m onboard -o 14540
mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u 14556
mavlink stream -r 50 -s LOCAL_POSITION_NED -u 14556
mavlink stream -r 50 -s GLOBAL_POSITION_INT -u 14556
mavlink stream -r 50 -s ATTITUDE -u 14556
mavlink stream -r 50 -s ATTITUDE_QUATERNION -u 14556
mavlink stream -r 50 -s ATTITUDE_TARGET -u 14556
mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u 14556
mavlink stream -r 20 -s RC_CHANNELS -u 14556
mavlink stream -r 250 -s HIGHRES_IMU -u 14556
mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u 14556
logger start -e -t
vmount start
mavlink boot_complete
replay trystart
src/modules/wind_estimator/wind_estimator_main.cpp
+ 3
− 11
View file @ 273988c1
...@@ -327,13 +327,12 @@ int WindEstimatorModule::print_status() ...@@ -327,13 +327,12 @@ int WindEstimatorModule::print_status()
perf_print_counter(_perf_interval); perf_print_counter(_perf_interval);
if (_instance > -1) { if (_instance > -1) {
unsigned instance = _instance; uORB::Subscription<wind_estimate_s> est{ORB_ID(wind_estimate), (unsigned)_instance};
uORB::Subscription<wind_estimate_s> est{ORB_ID(wind_estimate), instance};
est.update(); est.update();
print_message(est.get()); print_message(est.get());
} else { } else {
PX4_INFO("never published"); PX4_INFO("Running, but never published");
} }
return 0; return 0;
...@@ -344,12 +343,5 @@ extern "C" __EXPORT int wind_estimator_main(int argc, char *argv[]); ...@@ -344,12 +343,5 @@ extern "C" __EXPORT int wind_estimator_main(int argc, char *argv[]);
int int
wind_estimator_main(int argc, char *argv[]) wind_estimator_main(int argc, char *argv[])
{ {
int32_t wind_estimator_enabled = 0; return WindEstimatorModule::main(argc, argv);
param_get(param_find("WEST_EN"), &wind_estimator_enabled);
if (wind_estimator_enabled == 1) {
return WindEstimatorModule::main(argc, argv);
}
return PX4_OK;
} }
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment