@@ -5,14 +5,21 @@ February 2020: oiled the needle bed
April 2020:
May 2020:
**12-05-2020:** air ventilation was added to at back of knitting machine, to prevent the smell of the oil from going into the lab
**04-12-2020**
machine indicates that needle-bed needs to be oiled
oiled the needle-bed
can't reset the oil counter, will ask supplier
**19-05-2020:**
- oiled the needle bed
- oiled the carriage travel beams (on top)
note: there is quite some black residue (? not sure if its oily yarns dust) on the carriage travel beams. Should be removed next time
**27-11-2020**
both comb-motor belts have been replaced by supplier
Frequent 'Comb barrier light error'. Cleaning doesnt help. eventually rebooting was the only remedy
**06-11-2020:**
error comb connot be taken down anymore. Inspection reveals that both the comb-motor belts have been completely worn down and are on pint of breaking. Asked our Stoll supplier to replace them
**11-08-2020:**
Knitting machine hasnt been used several weeks (due to holidays), and now machine gives an backup battery error
