Maintenance-Log-Page.md

@@ -5,14 +5,21 @@ February 2020: oiled the needle bed
 April 2020:
 May 2020:
 
-**12-05-2020:** air ventilation was added to at back of knitting machine, to prevent the smell of the oil from going into the lab
+**04-12-2020**
+machine indicates that needle-bed needs to be oiled
+oiled the needle-bed
+can't reset the oil counter, will ask supplier 
 
-**19-05-2020:** 
-- oiled the needle bed
-- oiled the carriage travel beams (on top)
-note: there is quite some black residue (? not sure if its oily yarns dust) on the carriage travel beams. Should be removed next time
+**27-11-2020**
+both comb-motor belts have been replaced by supplier
 
-Frequent 'Comb barrier light error'. Cleaning doesnt help. eventually rebooting was the only remedy
+**06-11-2020:**
+error comb connot be taken down anymore. Inspection reveals that both the comb-motor belts have been completely worn down and are on pint of breaking. Asked our Stoll supplier to replace them
+
+
+**11-08-2020:** 
+Knitting machine hasnt been used several weeks (due to holidays), and now machine gives an backup battery error
+Rebooted
 
 **02-06-2020:** 
 
@@ -24,7 +31,11 @@ Frequent 'Comb barrier light error'. Cleaning doesnt help. eventually rebooting
 
 Seems to be a lot of dust/fluff inside the needle bed
 
+**19-05-2020:** 
+- oiled the needle bed
+- oiled the carriage travel beams (on top)
+note: there is quite some black residue (? not sure if its oily yarns dust) on the carriage travel beams. Should be removed next time
 
-**011-08-2020:** 
-Knitting machine hasnt been used several weeks (due to holidays), and now machine gives an backup battery error
-Rebooted
+Frequent 'Comb barrier light error'. Cleaning doesnt help. eventually rebooting was the only remedy
+
+**12-05-2020:** air ventilation was added to at back of knitting machine, to prevent the smell of the oil from going into the lab
\ No newline at end of file