Stoll-Instruction-videos.md

-Below are links to videos taken during several Stoll training days at Applied Labs
+Below is the link to videos that were taken during several Stoll training days at the Applied Labs
 
 Instruction videos can be accessed through the shared Surfdrive folder in this link [ <ins>here</ins>](https://surfdrive.surf.nl/files/index.php/f/7961847025)
 
-
-
-
-
-
-
-
-
-
+| Videos                                   |
+|------------------------------------------|
+| 1. NAMES OF MACHINE PARTS                |
+| 2. THREAD TENSION WITH 8 NEWTON          |
+| 3. YARN KNOT DETECTOR                    |
+| 4. THREADING THE MACHINE                 |
+| 5. YARN FEEDER NUMBERS                   |
+| 6. REPLACING A BROKEN NEEDLE             |
+| 7. REMOVING SET UP YARN                  |
+| 8. STARTING PROGRAM SP1                  |
+| 9. ERROR MESSAGES FROM THE MACHINE       |
+| 10. POSSIBLE MACHINE CRASHES             |
+| 11. WARM START AND COLD START MACHINE    |
+| 12. DIRECTION OF CARRIAGE                |
+| 13. LOAD PROGRAM IN THE MACHINE          |
+| 14. ADJUSTING MACHINE SPEED              |
+| 15. STOPPING THE MACHINE                 |
+| 16. SHOCK SENSOR                         |
+| 17. REMOVING THE COMB BOX                |
+| 18. REMOVING YARN CATCHER                |
+| 19. REFERENCE RUN OF THE MACHINE         |
+| 21. YARN FEEDER POSITION                 |
+| 22. MANUAL HOW TO CLEAN AND OIL MACHINE  |
+| 23. LIFTING UP THE NEEDLE BED            |
+| 24. INSTALLING THE INTARSIA YARN FEEDERS |
+| 25. SOFTWARE CREATE A NEW PATTERN        |
+| 27. SOFTWARE CREATING SIMPLE INTARSIA    |
+| 28.1. SOFTWARE ABOUT CARRIAGE MOVEMENTS  |
+| 8.1 CYCLE COUNTER RS                     |
+| 8.2 CARRIAGE RESISTANCE SENSOR           |
+| 26. SOFTWARE EXPLANATIONS                |
\ No newline at end of file