@@ -4,6 +4,25 @@ The DiFaLab offers polyjet 3D printing using the [Connex](Connex).
## Accepting an order
Here you can read about how to accept an order for the [Connex](Connex).
1. Copy the files from the customer's drive to the dedicated folder
2. Open the files in GrabCAD Print
3. etc.
\ No newline at end of file
1. Discuss whether the print can be made. Take into account the amount of time you have to spend preparing the file and when the client needs the print to be ready. If the print can be made, proceed to step 2.
2. Copy the files from the client's drive to the Dropbox/Connex3/Pending/[todaysdate] folder
3. Open the files in GrabCAD Print
4. Assign the material of each part based on the file name. If the file name does not reflect the material, ask the client to rename them.
5. Click 'Estimate' at the bottom right of the GrabCAD Print screen.
6. Paste the displayed material amounts in the 'JennyPriceAuto' file.
7. Go to the 'Connex Invoice's file and enter the client's information and total price of the print. Depending on their payment method (BAAN-code, PIN), prepare the transaction on the PIN machine.
8. Add the print to the Google Calendar called 'Connex Planning'
9. Start the print when it is planned
10. Mark the invoice as 'sent' when the print starts
## Maintenance
### Cleaning the print head
1. Switch to view 2 on the ???
2. Go to options/head inspection. The print head will center and the buildplate will lower.
3. Grab the mirror and light from the Connex drawer. And put them on the build plate. Now you can see the print heads.
4. Grab a fibreless cloth from the Connex drawer. Put some Isopropanol on it and use it to clean the print heads.
5. To the right of the print heads is a roller. Clean it using the fibreless cloth and rotate it with your other hand to get all sides. Make sure not to touch the UV light.
6. Take ALL objects off the buildplate and close the printer.
