@@ -27,3 +27,16 @@ The CR-10 can print many materials. If your material is not on this list, you ca
7. Click Preview. Any overhangs will be displayed in red on the model. Switch back to the Prepare view at the top of the screen and adjust the print settings before re-slicing until the red parts are gone or acceptable.
8. Click Save to File and store the file on a microSD card.
9. Insert the microSD card into the printer.
## Maintenance
### Leveling the print bed
1. Grab a piece of paper.
2. With the wheel next to the screen, select Disable Steppers.
3. By rotating the Z-axis manually, lower the hotend until it almost touches the buildplate.
4. Move the hotend to a corner of the buildplate.
5. With the piece of paper under the nozzle, turn the large screw under the bed until there is a slight friction when pulling on the piece of paper.
6. Move the nozzle to the other corners and repeat step 5.
7. Adjusting each corner individually does not properly level the bed the first time if there is a major alignment issue. When you have done all corners, do it all once more just to be sure.
