@@ -20,7 +20,7 @@ The CR-10 can print many materials. If your material is not on this list, you ca
### Preparing a file
1. Save your model as a .stl file.
1. Save your model as an .stl file.
2. Download and install [Cura](https://ultimaker.com/software/ultimaker-cura).
3. Inside Cura, load your file by clicking `File > Open` in the menu bar or clicking the folder icon in the top left. Select your .stl file.
4. Make sure the selected printer is the Creality CR-10 and the material is set correctly.
...
...
@@ -36,8 +36,8 @@ The CR-10 can print many materials. If your material is not on this list, you ca
1. Grab a piece of paper.
2. With the wheel next to the screen, select Disable Steppers.
3. By rotating the Z-axis manually, lower the hotend until it almost touches the buildplate.
4. Move the hotend to a corner of the buildplate.
3. By rotating the Z-axis manually, lower the hotend until it almost touches the printbed.
4. Move the hotend to a corner of the printbed.
5. With the piece of paper under the nozzle, turn the large screw under the bed until there is a slight friction when pulling on the piece of paper.
6. Move the nozzle to the other corners and repeat step 5.
7. Adjusting each corner individually does not properly level the bed the first time if there is a major alignment issue. When you have done all corners, do it all once more just to be sure.
