%File: anonymous-submission-latex-2024.tex
\documentclass[letterpaper]{article} % DO NOT CHANGE THIS
\usepackage[submission]{aaai24}  % DO NOT CHANGE THIS
\usepackage{times}  % DO NOT CHANGE THIS
\usepackage{helvet}  % DO NOT CHANGE THIS
\usepackage{courier}  % DO NOT CHANGE THIS
\usepackage[hyphens]{url}  % DO NOT CHANGE THIS
\usepackage{graphicx} % DO NOT CHANGE THIS
\urlstyle{rm} % DO NOT CHANGE THIS
\def\UrlFont{\rm}  % DO NOT CHANGE THIS
\usepackage{natbib}  % DO NOT CHANGE THIS AND DO NOT ADD ANY OPTIONS TO IT
\usepackage{caption} % DO NOT CHANGE THIS AND DO NOT ADD ANY OPTIONS TO IT
\frenchspacing  % DO NOT CHANGE THIS
\setlength{\pdfpagewidth}{8.5in} % DO NOT CHANGE THIS
\setlength{\pdfpageheight}{11in} % DO NOT CHANGE THIS
%
% These are recommended to typeset algorithms but not required. See the subsubsection on algorithms. Remove them if you don't have algorithms in your paper.
\usepackage{algorithm}
% \usepackage{algorithmic}

%
% These are are recommended to typeset listings but not required. See the subsubsection on listing. Remove this block if you don't have listings in your paper.
% \usepackage{newfloat}
% \usepackage{listings}
% \DeclareCaptionStyle{ruled}{labelfont=normalfont,labelsep=colon,strut=off} % DO NOT CHANGE THIS
% \lstset{%
% 	basicstyle={\footnotesize\ttfamily},% footnotesize acceptable for monospace
% 	numbers=left,numberstyle=\footnotesize,xleftmargin=2em,% show line numbers, remove this entire line if you don't want the numbers.
% 	aboveskip=0pt,belowskip=0pt,%
% 	showstringspaces=false,tabsize=2,breaklines=true}
% \floatstyle{ruled}
% \newfloat{listing}{tb}{lst}{}
% \floatname{listing}{Listing}
%
% Keep the \pdfinfo as shown here. There's no need
% for you to add the /Title and /Author tags.
\pdfinfo{
/TemplateVersion (2024.1)
}

\usepackage{amsfonts}       % blackboard math symbols
\usepackage{amsmath}
\usepackage{amsthm}
\usepackage{caption}
\usepackage{graphicx}
\usepackage{algpseudocode}
\usepackage{import}
\usepackage{booktabs}
\usepackage{longtable}
\usepackage{array}
\usepackage{multirow}
\usepackage{placeins}


% Numbered Environments:
\newtheorem{definition}{Definition}[section]
\newtheorem{question}{Research Question}[section]

% Bibliography
% \bibliographystyle{unsrtnat}
% \setcitestyle{numbers,square,comma}

% Algorithm
\renewcommand{\algorithmicrequire}{\textbf{Input:}}
\renewcommand{\algorithmicensure}{\textbf{Output:}}

% DISALLOWED PACKAGES
% \usepackage{authblk} -- This package is specifically forbidden
% \usepackage{balance} -- This package is specifically forbidden
% \usepackage{color (if used in text)
% \usepackage{CJK} -- This package is specifically forbidden
% \usepackage{float} -- This package is specifically forbidden
% \usepackage{flushend} -- This package is specifically forbidden
% \usepackage{fontenc} -- This package is specifically forbidden
% \usepackage{fullpage} -- This package is specifically forbidden
% \usepackage{geometry} -- This package is specifically forbidden
% \usepackage{grffile} -- This package is specifically forbidden
% \usepackage{hyperref} -- This package is specifically forbidden
% \usepackage{navigator} -- This package is specifically forbidden
% (or any other package that embeds links such as navigator or hyperref)
% \indentfirst} -- This package is specifically forbidden
% \layout} -- This package is specifically forbidden
% \multicol} -- This package is specifically forbidden
% \nameref} -- This package is specifically forbidden
% \usepackage{savetrees} -- This package is specifically forbidden
% \usepackage{setspace} -- This package is specifically forbidden
% \usepackage{stfloats} -- This package is specifically forbidden
% \usepackage{tabu} -- This package is specifically forbidden
% \usepackage{titlesec} -- This package is specifically forbidden
% \usepackage{tocbibind} -- This package is specifically forbidden
% \usepackage{ulem} -- This package is specifically forbidden
% \usepackage{wrapfig} -- This package is specifically forbidden
% DISALLOWED COMMANDS
% \nocopyright -- Your paper will not be published if you use this command
% \addtolength -- This command may not be used
% \balance -- This command may not be used
% \baselinestretch -- Your paper will not be published if you use this command
% \clearpage -- No page breaks of any kind may be used for the final version of your paper
% \columnsep -- This command may not be used
% \newpage -- No page breaks of any kind may be used for the final version of your paper
% \pagebreak -- No page breaks of any kind may be used for the final version of your paperr
% \pagestyle -- This command may not be used
% \tiny -- This is not an acceptable font size.
% \vspace{- -- No negative value may be used in proximity of a caption, figure, table, section, subsection, subsubsection, or reference
% \vskip{- -- No negative value may be used to alter spacing above or below a caption, figure, table, section, subsection, subsubsection, or reference

\setcounter{secnumdepth}{2} %May be changed to 1 or 2 if section numbers are desired.

% The file aaai24.sty is the style file for AAAI Press
% proceedings, working notes, and technical reports.
%

% Title

% Your title must be in mixed case, not sentence case.
% That means all verbs (including short verbs like be, is, using,and go),
% nouns, adverbs, adjectives should be capitalized, including both words in hyphenated terms, while
% articles, conjunctions, and prepositions are lower case unless they
% directly follow a colon or long dash
\title{Faithful Model Explanations through\\
Energy-Constrained Conformal Counterfactuals}
\author{
    %Authors
    % All authors must be in the same font size and format.
    Written by AAAI Press Staff\textsuperscript{\rm 1}\thanks{With help from the AAAI Publications Committee.}\\
    AAAI Style Contributions by Pater Patel Schneider,
    Sunil Issar,\\
    J. Scott Penberthy,
    George Ferguson,
    Hans Guesgen,
    Francisco Cruz\equalcontrib,
    Marc Pujol-Gonzalez\equalcontrib
}
\affiliations{
    %Afiliations
    \textsuperscript{\rm 1}Association for the Advancement of Artificial Intelligence\\
    % If you have multiple authors and multiple affiliations
    % use superscripts in text and roman font to identify them.
    % For example,

    % Sunil Issar\textsuperscript{\rm 2},
    % J. Scott Penberthy\textsuperscript{\rm 3},
    % George Ferguson\textsuperscript{\rm 4},
    % Hans Guesgen\textsuperscript{\rm 5}
    % Note that the comma should be placed after the superscript

    1900 Embarcadero Road, Suite 101\\
    Palo Alto, California 94303-3310 USA\\
    % email address must be in roman text type, not monospace or sans serif
    proceedings-questions@aaai.org
%
% See more examples next
}

%Example, Single Author, ->> remove \iffalse,\fi and place them surrounding AAAI title to use it
% \iffalse
% \title{My Publication Title --- Single Author}
% \author {
%     Author Name
% }
% \affiliations{
%     Affiliation\\
%     Affiliation Line 2\\
%     name@example.com
% }
% \fi

% \iffalse
% %Example, Multiple Authors, ->> remove \iffalse,\fi and place them surrounding AAAI title to use it
% \title{My Publication Title --- Multiple Authors}
% \author {
%     % Authors
%     First Author Name\textsuperscript{\rm 1},
%     Second Author Name\textsuperscript{\rm 2},
%     Third Author Name\textsuperscript{\rm 1}
% }
% \affiliations {
%     % Affiliations
%     \textsuperscript{\rm 1}Affiliation 1\\
%     \textsuperscript{\rm 2}Affiliation 2\\
%     firstAuthor@affiliation1.com, secondAuthor@affilation2.com, thirdAuthor@affiliation1.com
% }
% \fi

\begin{document}

% Body of the paper
\import{../}{body.tex}
  
\section{Acknowledgments}

Some of the members of TU Delft were partially funded by ICAI AI for Fintech Research, an ING — TU Delft
collaboration.

\FloatBarrier

\bibliography{../bib}

\pagebreak

\onecolumn

\import{../}{appendix.tex}

\end{document}
