Enabled leds on FMU again

makefiles/config_px4fmu_default.mk

@@ -14,6 +14,7 @@ MODULES		+= drivers/device
 MODULES		+= drivers/stm32
 MODULES		+= drivers/stm32/adc
 MODULES		+= drivers/stm32/tone_alarm
+MODULES		+= drivers/led
 MODULES		+= drivers/px4io
 MODULES		+= drivers/px4fmu
 MODULES		+= drivers/boards/px4fmu

src/drivers/boards/px4fmu/module.mk

@@ -6,4 +6,5 @@ SRCS		 = px4fmu_can.c \
 		   px4fmu_init.c \
 		   px4fmu_pwm_servo.c \
 		   px4fmu_spi.c \
-		   px4fmu_usb.c
+		   px4fmu_usb.c \
+		   px4fmu_led.c

src/drivers/boards/px4fmu/px4fmu_init.c

 /****************************************************************************
  *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -91,6 +91,19 @@
 #  endif
 #endif
 
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init();
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
 /****************************************************************************
  * Protected Functions
  ****************************************************************************/
@@ -114,7 +127,7 @@ __EXPORT void stm32_boardinitialize(void)
 	/* configure SPI interfaces */
 	stm32_spiinitialize();
 
-	/* configure LEDs */
+	/* configure LEDs (empty call to NuttX' ledinit) */
 	up_ledinit();
 }
 
@@ -178,11 +191,11 @@ __EXPORT int nsh_archinitialize(void)
 		       (hrt_callout)stm32_serial_dma_poll,
 		       NULL);
 
-	// initial LED state
-//	drv_led_start();
-	up_ledoff(LED_BLUE);
-	up_ledoff(LED_AMBER);
-	up_ledon(LED_BLUE);
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_AMBER);
+	led_on(LED_BLUE);
+
 
 	/* Configure SPI-based devices */
 

src/drivers/boards/px4fmu/px4fmu_led.c

@@ -39,19 +39,27 @@
 
 #include <nuttx/config.h>
 
-#include <stdint.h>
 #include <stdbool.h>
-#include <debug.h>
 
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "up_arch.h"
-#include "up_internal.h"
 #include "stm32_internal.h"
 #include "px4fmu_internal.h"
 
-__EXPORT void up_ledinit()
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init();
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+__EXPORT void led_init()
 {
 	/* Configure LED1-2 GPIOs for output */
 
@@ -59,7 +67,7 @@ __EXPORT void up_ledinit()
 	stm32_configgpio(GPIO_LED2);
 }
 
-__EXPORT void up_ledon(int led)
+__EXPORT void led_on(int led)
 {
 	if (led == 0)
 	{
@@ -73,7 +81,7 @@ __EXPORT void up_ledon(int led)
 	}
 }
 
-__EXPORT void up_ledoff(int led)
+__EXPORT void led_off(int led)
 {
 	if (led == 0)
 	{

src/drivers/led/led.cpp

@@ -41,12 +41,17 @@
 #include <drivers/device/device.h>
 #include <drivers/drv_led.h>
 
-/* Ideally we'd be able to get these from up_internal.h */
-//#include <up_internal.h>
+/*
+ * Ideally we'd be able to get these from up_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
 __BEGIN_DECLS
-extern void up_ledinit();
-extern void up_ledon(int led);
-extern void up_ledoff(int led);
+extern void led_init();
+extern void led_on(int led);
+extern void led_off(int led);
 __END_DECLS
 
 class LED : device::CDev
@@ -74,7 +79,7 @@ int
 LED::init()
 {
 	CDev::init();
-	up_ledinit();
+	led_init();
 
 	return 0;
 }
@@ -86,11 +91,11 @@ LED::ioctl(struct file *filp, int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case LED_ON:
-		up_ledon(arg);
+		led_on(arg);
 		break;
 
 	case LED_OFF:
-		up_ledoff(arg);
+		led_off(arg);
 		break;
 
 	default: