Skip to content
Snippets Groups Projects
Commit e1e3c9fc authored by Daniel Agar's avatar Daniel Agar Committed by Lorenz Meier
Browse files

sensors split accel/gyro/mag calibration parameters

parent 8b7de092
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
src/modules/sensors/sensor_params.c
+ 15
− 882
View file @ e1e3c9fc
......@@ -31,775 +31,6 @@
*
****************************************************************************/
/**
* @file sensor_params.c
*
* Parameters defined by the sensors task.
*
* @author Lorenz Meier <lorenz@px4.io>
* @author Julian Oes <julian@px4.io>
* @author Thomas Gubler <thomas@px4.io>
*/
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_ID, 0);
/**
* Gyro X-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @min -5.0
* @max 5.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ID, 0);
/**
* Rotation of magnetometer 0 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_ID, 0);
/**
* Gyro X-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @min -5.0
* @max 5.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ID, 0);
/**
* Rotation of magnetometer 1 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_ID, 0);
/**
* Gyro X-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @min -10.0
* @max 10.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @min -5.0
* @max 5.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ID, 0);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ID, 0);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZSCALE, 1.0f);
/**
* Primary accel ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC_PRIME, 0);
/**
* Primary gyro ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO_PRIME, 0);
/**
* Primary mag ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG_PRIME, 0);
/**
* Bitfield selecting mag sides for calibration
*
* DETECT_ORIENTATION_TAIL_DOWN = 1
* DETECT_ORIENTATION_NOSE_DOWN = 2
* DETECT_ORIENTATION_LEFT = 4
* DETECT_ORIENTATION_RIGHT = 8
* DETECT_ORIENTATION_UPSIDE_DOWN = 16
* DETECT_ORIENTATION_RIGHTSIDE_UP = 32
*
* @min 34
* @max 63
* @value 34 Two side calibration
* @value 38 Three side calibration
* @value 63 Six side calibration
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG_SIDES, 63);
/**
* Primary baro ID
*
......@@ -854,12 +85,11 @@ PARAM_DEFINE_FLOAT(SENS_DPRES_ANSC, 0);
*
* @min 500
* @max 1500
* @group Sensor Calibration
* @group Sensors
* @unit hPa
*/
PARAM_DEFINE_FLOAT(SENS_BARO_QNH, 1013.25f);
/**
* Board rotation
*
......@@ -894,7 +124,7 @@ PARAM_DEFINE_FLOAT(SENS_BARO_QNH, 1013.25f);
*
* @reboot_required true
*
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_INT32(SENS_BOARD_ROT, 0);
......@@ -916,7 +146,7 @@ PARAM_DEFINE_INT32(SENS_BOARD_ROT, 0);
*
* @reboot_required true
*
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_INT32(SENS_FLOW_ROT, 6);
......@@ -927,7 +157,7 @@ PARAM_DEFINE_INT32(SENS_FLOW_ROT, 6);
* to fine tune the board offset in the event of misalignment.
*
* @unit deg
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_FLOAT(SENS_BOARD_Y_OFF, 0.0f);
......@@ -938,7 +168,7 @@ PARAM_DEFINE_FLOAT(SENS_BOARD_Y_OFF, 0.0f);
* to fine tune the board offset in the event of misalignment.
*
* @unit deg
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_FLOAT(SENS_BOARD_X_OFF, 0.0f);
......@@ -949,124 +179,27 @@ PARAM_DEFINE_FLOAT(SENS_BOARD_X_OFF, 0.0f);
* to fine tune the board offset in the event of misalignment.
*
* @unit deg
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_FLOAT(SENS_BOARD_Z_OFF, 0.0f);
/**
* Select primary magnetometer.
* DEPRECATED, only used on V1 hardware
*
* @min 0
* @max 2
* @value 0 Auto-select Mag
* @value 1 External is primary Mag
* @value 2 Internal is primary Mag
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(SENS_EXT_MAG, 0);
/**
* Threshold (of RMS) to warn about high vibration levels
*
* @group Sensor Calibration
* @group Sensors
* @min 0.01
* @max 10
* @decimal 2
*/
PARAM_DEFINE_FLOAT(ATT_VIBE_THRESH, 0.2f);
/**
* Scaling factor for battery voltage sensor on PX4IO.
*
* @min 1
* @max 100000
* @group Battery Calibration
*/
PARAM_DEFINE_INT32(BAT_V_SCALE_IO, 10000);
/**
* Scaling from ADC counts to volt on the ADC input (battery voltage)
*
* This is not the battery voltage, but the intermediate ADC voltage.
* A value of -1 signifies that the board defaults are used, which is
* highly recommended.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_CNT_V_VOLT, -1.0f);
/**
* Scaling from ADC counts to volt on the ADC input (battery current)
*
* This is not the battery current, but the intermediate ADC voltage.
* A value of -1 signifies that the board defaults are used, which is
* highly recommended.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_CNT_V_CURR, -1.0);
/**
* Offset in volt as seen by the ADC input of the current sensor.
*
* This offset will be subtracted before calculating the battery
* current based on the voltage.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_V_OFFS_CURR, 0.0);
/**
* Battery voltage divider (V divider)
*
* This is the divider from battery voltage to 3.3V ADC voltage.
* If using e.g. Mauch power modules the value from the datasheet
* can be applied straight here. A value of -1 means to use
* the board default.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_V_DIV, -1.0);
/**
* Battery current per volt (A/V)
*
* The voltage seen by the 3.3V ADC multiplied by this factor
* will determine the battery current. A value of -1 means to use
* the board default.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_A_PER_V, -1.0);
/**
* Battery monitoring source.
*
* This parameter controls the source of battery data. The value 'Power Module'
* means that measurements are expected to come from a power module. If the value is set to
* 'External' then the system expects to receive mavlink battery status messages.
*
* @min 0
* @max 1
* @value 0 Power Module
* @value 1 External
* @group Battery Calibration
*/
PARAM_DEFINE_INT32(BAT_SOURCE, 0);
/**
* Lidar-Lite (LL40LS)
*
* @reboot_required true
* @min 0
* @max 2
* @group Sensor Enable
* @group Sensors
* @value 0 Disabled
* @value 1 PWM
* @value 2 I2C
......@@ -1079,7 +212,7 @@ PARAM_DEFINE_INT32(SENS_EN_LL40LS, 0);
* @reboot_required true
* @min 0
* @max 4
* @group Sensor Enable
* @group Sensors
* @value 0 Disabled
* @value 1 SF02
* @value 2 SF10/a
......@@ -1095,7 +228,7 @@ PARAM_DEFINE_INT32(SENS_EN_SF0X, 0);
* @reboot_required true
*
* @boolean
* @group Sensor Enable
* @group Sensors
*/
PARAM_DEFINE_INT32(SENS_EN_MB12XX, 0);
......@@ -1105,7 +238,7 @@ PARAM_DEFINE_INT32(SENS_EN_MB12XX, 0);
* @reboot_required true
* @min 0
* @max 3
* @group Sensor Enable
* @group Sensors
* @value 0 Disabled
* @value 1 Autodetect
* @value 2 TROne
......@@ -1119,7 +252,7 @@ PARAM_DEFINE_INT32(SENS_EN_TRANGER, 0);
* @reboot_required true
* @min 0
* @max 5
* @group Sensor Enable
* @group Sensors
* @value 0 Disabled
* @value 1 SF10/a
* @value 2 SF10/b
......@@ -1134,7 +267,7 @@ PARAM_DEFINE_INT32(SENS_EN_SF1XX, 0);
*
* @value -1 Thermal control unavailable
* @value 0 Thermal control off
* @group Sensor Enable
* @group Sensors
*/
PARAM_DEFINE_INT32(SENS_EN_THERMAL, -1);
......@@ -1149,7 +282,7 @@ PARAM_DEFINE_INT32(SENS_EN_THERMAL, -1);
* @max 1000
* @unit Hz
* @reboot_required true
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_FLOAT(IMU_GYRO_CUTOFF, 30.0f);
......@@ -1164,6 +297,6 @@ PARAM_DEFINE_FLOAT(IMU_GYRO_CUTOFF, 30.0f);
* @max 1000
* @unit Hz
* @reboot_required true
* @group Sensor Calibration
* @group Sensors
*/
PARAM_DEFINE_FLOAT(IMU_ACCEL_CUTOFF, 30.0f);
src/modules/sensors/sensor_params_accel.c 0 → 100644
+ 186
− 0
View file @ e1e3c9fc
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* Primary accel ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC_PRIME, 0);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC0_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC0_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC1_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC1_ZSCALE, 1.0f);
/**
* ID of the Accelerometer that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_ACC2_ID, 0);
/**
* Accelerometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XOFF, 0.0f);
/**
* Accelerometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YOFF, 0.0f);
/**
* Accelerometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZOFF, 0.0f);
/**
* Accelerometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_XSCALE, 1.0f);
/**
* Accelerometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_YSCALE, 1.0f);
/**
* Accelerometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_ACC2_ZSCALE, 1.0f);
src/modules/sensors/sensor_params_battery.c 0 → 100644
+ 116
− 0
View file @ e1e3c9fc
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* Scaling factor for battery voltage sensor on PX4IO.
*
* @min 1
* @max 100000
* @group Battery Calibration
*/
PARAM_DEFINE_INT32(BAT_V_SCALE_IO, 10000);
/**
* Scaling from ADC counts to volt on the ADC input (battery voltage)
*
* This is not the battery voltage, but the intermediate ADC voltage.
* A value of -1 signifies that the board defaults are used, which is
* highly recommended.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_CNT_V_VOLT, -1.0f);
/**
* Scaling from ADC counts to volt on the ADC input (battery current)
*
* This is not the battery current, but the intermediate ADC voltage.
* A value of -1 signifies that the board defaults are used, which is
* highly recommended.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_CNT_V_CURR, -1.0);
/**
* Offset in volt as seen by the ADC input of the current sensor.
*
* This offset will be subtracted before calculating the battery
* current based on the voltage.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_V_OFFS_CURR, 0.0);
/**
* Battery voltage divider (V divider)
*
* This is the divider from battery voltage to 3.3V ADC voltage.
* If using e.g. Mauch power modules the value from the datasheet
* can be applied straight here. A value of -1 means to use
* the board default.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_V_DIV, -1.0);
/**
* Battery current per volt (A/V)
*
* The voltage seen by the 3.3V ADC multiplied by this factor
* will determine the battery current. A value of -1 means to use
* the board default.
*
* @group Battery Calibration
* @decimal 8
*/
PARAM_DEFINE_FLOAT(BAT_A_PER_V, -1.0);
/**
* Battery monitoring source.
*
* This parameter controls the source of battery data. The value 'Power Module'
* means that measurements are expected to come from a power module. If the value is set to
* 'External' then the system expects to receive mavlink battery status messages.
*
* @min 0
* @max 1
* @value 0 Power Module
* @value 1 External
* @group Battery Calibration
*/
PARAM_DEFINE_INT32(BAT_SOURCE, 0);
src/modules/sensors/sensor_params_gyro.c 0 → 100644
+ 186
− 0
View file @ e1e3c9fc
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* Primary gyro ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO_PRIME, 0);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO0_ID, 0);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO0_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO1_ID, 0);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO1_ZSCALE, 1.0f);
/**
* ID of the Gyro that the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_GYRO2_ID, 0);
/**
* Gyro X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XOFF, 0.0f);
/**
* Gyro Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YOFF, 0.0f);
/**
* Gyro Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZOFF, 0.0f);
/**
* Gyro X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_XSCALE, 1.0f);
/**
* Gyro Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_YSCALE, 1.0f);
/**
* Gyro Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_GYRO2_ZSCALE, 1.0f);
src/modules/sensors/sensor_params_mag.c 0 → 100644
+ 431
− 0
View file @ e1e3c9fc
/****************************************************************************
*
* Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* Primary mag ID
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG_PRIME, 0);
/**
* Bitfield selecting mag sides for calibration
*
* DETECT_ORIENTATION_TAIL_DOWN = 1
* DETECT_ORIENTATION_NOSE_DOWN = 2
* DETECT_ORIENTATION_LEFT = 4
* DETECT_ORIENTATION_RIGHT = 8
* DETECT_ORIENTATION_UPSIDE_DOWN = 16
* DETECT_ORIENTATION_RIGHTSIDE_UP = 32
*
* @min 34
* @max 63
* @value 34 Two side calibration
* @value 38 Three side calibration
* @value 63 Six side calibration
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG_SIDES, 63);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ID, 0);
/**
* Rotation of magnetometer 0 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG0_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG0_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ID, 0);
/**
* Rotation of magnetometer 1 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG1_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG1_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ID, 0);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG2_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG2_ZSCALE, 1.0f);
/**
* ID of Magnetometer the calibration is for.
*
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ID, 0);
/**
* Rotation of magnetometer 2 relative to airframe.
*
* An internal magnetometer will force a value of -1, so a GCS
* should only attempt to configure the rotation if the value is
* greater than or equal to zero.
*
* @value -1 Internal mag
* @value 0 No rotation
* @value 1 Yaw 45°
* @value 2 Yaw 90°
* @value 3 Yaw 135°
* @value 4 Yaw 180°
* @value 5 Yaw 225°
* @value 6 Yaw 270°
* @value 7 Yaw 315°
* @value 8 Roll 180°
* @value 9 Roll 180°, Yaw 45°
* @value 10 Roll 180°, Yaw 90°
* @value 11 Roll 180°, Yaw 135°
* @value 12 Pitch 180°
* @value 13 Roll 180°, Yaw 225°
* @value 14 Roll 180°, Yaw 270°
* @value 15 Roll 180°, Yaw 315°
* @value 16 Roll 90°
* @value 17 Roll 90°, Yaw 45°
* @value 18 Roll 90°, Yaw 90°
* @value 19 Roll 90°, Yaw 135°
* @value 20 Roll 270°
* @value 21 Roll 270°, Yaw 45°
* @value 22 Roll 270°, Yaw 90°
* @value 23 Roll 270°, Yaw 135°
* @value 24 Pitch 90°
* @value 25 Pitch 270°
*
* @min -1
* @max 30
* @reboot_required true
* @group Sensor Calibration
*/
PARAM_DEFINE_INT32(CAL_MAG3_ROT, -1);
/**
* Magnetometer X-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XOFF, 0.0f);
/**
* Magnetometer Y-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YOFF, 0.0f);
/**
* Magnetometer Z-axis offset
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZOFF, 0.0f);
/**
* Magnetometer X-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_XSCALE, 1.0f);
/**
* Magnetometer Y-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_YSCALE, 1.0f);
/**
* Magnetometer Z-axis scaling factor
*
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(CAL_MAG3_ZSCALE, 1.0f);
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment