Skip to content
Snippets Groups Projects
Select Git revision
  • DQRC14A
  • acceleration-based-input
  • add-vmount-absolute-angle
  • add_collision_info
  • auto-trajectory-hack
  • avoid_int_ci
  • beta
  • camera_capture_tests
  • camera_trigger_fmu_pins78
  • col_prev_dist_sensor
  • dev-ams
  • dev-autotune-velocity
  • dev-flighttask-autotune-velocity
  • dev-mpc-l1-upstream
  • dev-velocitysmoothing-test
  • dev-yawerr-filter
  • distance_sensor_for_cp
  • dual_airspeed
  • ecl_PR-597
  • ecl_PR-603
  • v1.9.1-rc0
  • v1.9.0
  • v1.9.0-rc2
  • v1.9.0-rc1
  • v1.9.0-rc0
  • v1.9.0-beta3
  • v1.9.0-beta2
  • v1.9.0-beta1
  • v1.9.0-alpha
  • v1.8.2
  • v1.8.1
  • v1.8.0
  • v1.8.0-rc0
  • v1.8.0-beta2
  • v1.8.0-beta1
  • v1.7.4beta
  • v1.7.3
  • v1.7.3beta
  • v1.7.2
  • v1.7.1
40 results
You can move around the graph by using the arrow keys.
Created with Raphaël 2.2.021Jun201918171615141312111098765432131May3029282726252423222120191817161514119875432129Apr28272625242321201918171615141312111098765ms5525_airspeed: add -a flag to scan all i2c busses during startms4525_airspeed: remove i2c_bus parameter from start function (it tries all busses)ms4525_airspeed: change start_bus from bool to intms4525_airspeed: remove PX4_I2C_ALLms4525_airspeed: add -a flag to scan all i2c busses during start LandDetector FW: Fix param min/max values and descriptions as well as some variable names which were wrong/outdated (#9708)cmake: add nuttx force-upload target (#9717)Tilt-Quadrotor Mixer and Airframe files (#9496)df_ms5611_wrapper: fix initialization of error_count & device_idekf2: Enable use of flow sensors not fitted with gyros (#9703)offboard control mode: add separate horizontal from vertical translationMavlink: initialize _ping_statsRevert "test2"pr-telemetry_re…pr-telemetry_remote_typeAdd compile flag for newer GCCFix: GCS type is 6Update READMEv1.8.0v1.8.0calibration_routines: fix 'Command denied during calibration' error messageUpdate submodule sitl_gazebo to latest Sat Jun 16 21:27:20 EDT 2018otherwise posix_sitl_rtps fail to build (MACOS)PX4IO: Initialize all channels to zeroUpdate submodule apps to latest Fri Jun 15 15:25:42 UTC 2018Update submodule v2.0 to latest Fri Jun 15 15:25:36 UTC 2018Removed zero termination as a for constuct was usedChanged variable type and used cpp array init.Fixed capitalization grammarRename trigger argument for claritycamera_trigger:Refacter GPIO camera triggeringrtl: change "RTL: land at home" message from critical to infoecl: update submodulelaunch: make px4 required (#9682)Vl53lxx Driver Coverity Fixes (#9671)Updated submudule platforms/nuttx/NuttX/nuttxfix camera_trigger gpio: _pins[i] == 0 is validBUGFIX:GPS not working. Invalid values passed to px4_arch_configgpioRevert "gps: reopen the gps port on failed auto-detection"updated sitl_gazebo: use asphalt plane instead of uneven ground to reduce (#9675)Jenkins SITL tests completely wipe workspace (#9677)ros tests: add an interactive flag & disable the PX4 shell for ROS tests (#9672)Fixed-wing autoland: Fix bug that could cause a steep pitch increase and thus aircraft stall during the flare (#9674)precland: put land precision parameter to MAVLink mission item
Loading