CHANGELOG.md

Changelog

All notable changes to Pulselib will be documented in this file.

[1.6.26] - 2023-06-30

• Fixed Qblox time offset bug in previous release.

[1.6.27] - 2023-07-@@@

• Fixed retries on Keysight exceptions

[1.6.25] - 2023-06-30

• Fixed merging of phase shift and MW pulse in conditional segment (Keysight_QS)
• Fixed Qblox uploader with unaligned long pulses and gap between pulses.
• Fixed Keysight release_all_awg_memory
• Added measure till end of sequence (time trace feature)

[1.6.24] - 2023-06-19

• Fixed Qblox uploader with unaligned pulses.

[1.6.23] - 2023-05-27

• Fixed Keysight FPGA marker upload time rounding (Keysight and Keysight_QS).

[1.6.22] - 2023-05-23

• Fixed QuantumSequencer (Keysight_QS) long pulses with post-phase shift.

[1.6.21] - 2023-05-17

• Fixed Qblox uploader for unaligned MW pulses > 200 ns

[1.6.20] - 2023-05-08

• Fixed Keysight digitizer configuration for time-traces
• Added total_time to sequence and metadata

[1.6.19] - 2023-05-04

• Fixed Qblox uploader
• Fixed digitizer configuration for time-traces with Keysight uploaders

[1.6.18] - 2023-05-03

• Added histograms to measurement parameter

[1.6.17] - 2023-05-02

• Render pulses and ramps on Qblox with 1 ns resolution.
• Removed segment_pulse.add_ramp(), because it gave too many errors.

[1.6.16] - 2023-04-19

• Renamed idle frequency and reference frequency to qubit resonance frequency.
• Allow overrule of qubit resonance frequency in sequence.
• Added FrequencyUndefined for not-coherent pulsing with NCO frequency 0.0 between pulses.
• Deprecate segment_pulse.add_ramp in favour of add_ramp_ss
• Added configuration of digitizer to Keysight_QS uploader
• Added at(index) to loop_obj to get value at sequence index.
• Corrected phase for MW pulses on Qblox.
• Added py.typed for mypy
• Merge marker pulses if < 10 ns between pulses.

[1.6.15] - 2023-03-06

• Fixed rounding errors on segment boundaries in Qblox uploader.
• Qblox uploader assign IQ marker to sequencer of first qubit on IQ output.
• Refactored IQ channel definition: pulse_lib.define_iq_channel()
• Added lp.arange() similar to numpy.arange()

[1.6.14] - 2023-03-03

• Fixed missing IQ marker around chirp

[1.6.13] - 2023-03-01

• Fixed MeasurementMajority to work with pulse_templates.
• Fixed DC compensation on Qblox.
• Fixed some edge cases.

[1.6.12] - 2023-02-23

• QuantumSequencer: split long constant waveforms in start and stop waveform.

[1.6.11] - 2023-02-17

• Fixed measurement parameter for acquisition with accept_if not None

[1.6.10] - 2023-02-13

• Round acquisition time towards zero in uploader
• Fix for measurement expressions in sequence
• Fix for simultaneous driving
• Fixed majority vote in expression

[1.6.9] - 2023-02-06

• Fixed acquire wait=True with n_repeat
• Added checks on t_measure and sample rate in read_channels.
• Fixed actual number of points and interval for acquisition: n_samples, interval = uploader.actual_acquisition_points(acquisition_channel, t_measure, sample_rate)
• Replaced logging by logger

[1.6.8] - 2023-02-02

• Fixed setpoints of measurement parameter for time traces > 2 seconds.
• Fixed simultaneous pulses with indexing of segments on looping parameter.
• Calculate timeout for get_acquisition_data from sequence.

[1.6.7] - 2023-02-01

• Added continuous mode for Keysight AWG.

[1.6.6] - 2023-01-30

• Fixed errors when slicing segments after adding dimension with update_dim.
• Remove phase shifts of 0.0 rad before rendering.
• Fixed error in KeysightQS with phase-shift after MW pulse.
• Added tests.utils.last_upload.get_last_upload to analyze upload after exception

[1.6.5] - 2023-01-23

• Fixed numpy deprecation of np.int and np.float.

[1.6.4] - 2023-01-19

Fixed

• Qblox uploader overlapping pulses error

[1.6.3] - 2023-01-19

Added

• parameter iq_mode to sequencer.get_measurement_parameter(), get_measurement_data(), Qblox fast scan
• read_channels() to read digitizer channels without pulsing AWG. (Currently Qblox only)
• Keysight AWG mock rendering at 10 GSa/s using digital filter setting.
• acquire(... wait=True) to add wait time for acquisition.

Fixed

• Timing of Keysight_QS with 2022 firmware
• Keysight_QS rf_source bug
• Fixed n_samples in measurement_param
• Fixed Qblox sequence generation when no pulses on AWG channels

Removed

• get_acquisition_param. It was deprecated for quite some time.

[1.6.2] - 2022-12-22

Added

• pulselib.get_channel_attenuations()

Changed

• Sequencer upload and play only retry upload after specific Keysight exception.
• Chirp is stored as an instruction to be rendered by backend.

[1.6.1] - 2022-12-06

Added

• start_times to measurement_description

Changed

• measurement names do not have to be unique. A postfix makes them unique.

[1.6.0] - 2022-11-25

Attention !!

• Digitizer trigger timing has been corrected for channel delays !!
• Digitizer RF source API has changed.
• Looping has been refactored to add functionality and improve performance.
• Important internal interface changes are marked with [v1.6.0] in the code.

Added

• Added segment_container.update_dim for looping with index
• Added numpy array operations to looping variables
• Added looping.array to loop over an arbitrary array of values
• Added digitizer_channel.delay
• Added prolongation_ns to RF source configuration
• Added iq_complex to fast_scan1D_param and fast_scan2D_param

Changed

• Changed set_digitizer_rf_source trigger_offset_ns to startup_time_ns.
• Refactored looping and segment indexing:
  • Improved performance of looping arguments
  • Improved performance of segment_container.reset_time()
  • Improved performance of segment and segment_container indexing
  • Improved performance of sequence pre-rendering
  • Reduced memory usage
  • Added sanity checks on looping arguments
• Added checks on frequency when rendering MW pulses

Removed

• Removed segment_container append(), slice_time(), last_edit
• Removed segment_IQ.add_global_phase()

Fixed

• Fixed addition of 2 segment_containers to construct simultaneous driving
• Tektronix marker on unused AWG channel
• Measurement result inversion with zero_on_high
• Multiple measurements on 1 channel with down-sampling

[1.5.6] - 2022-10-10

Fixed

• Fixed error in measurement parameter when no shot is accepted

[1.5.5] - 2022-09-27

Fixed

• Incorrect setpoints in measurement_param.add_derived_param.

[1.5.4] - 2022-09-23

Added

• Added endpoint to looping.linspace, logspace and geomspace.
• Added more data selection options to get_measurement_results()
• Added addition of segment_containers to construct simultaneous driving
• Added sequence_builder.add_simultaneous()

Changed

• Do not add axis 'repetition' if sequencer.n_rep == None.

Fixed

• Fixed set_acquisition with t_measure and sample_rate
• Fixed get_measurement_param with iq_complex=False
• Fixed high memory usage due to unlimited waveform cache.

[1.5.3] - 2022-08-05

Fixed

• Fixed looping and HVI marker
• Added retries to sequence upload and play

[1.5.2] - 2022-08-03

Fixed

• sequencer.get_channel_data and get_measurement_param when using play() with index as done by core-tools.

[1.5.1] - 2022-08-03

Added

• Added sequencer.plot()

Fixed

• Fixed looping t_off of add_HVI_marker
• Fixed plotting after mk_sequence

[1.5.0] - 2022-07-25

Added

• Support for Qblox modules: QCM and QRM
• Added sequencer.get_channel_data
• Added sequencer.set_acquisition
• Added sequencer.get_measurement_param with automatic upload/play and thresholding
• Added sequencer.get_measurement_results
• Added channel acquire(..., n_repeat= , interval= )
• Added qblox_fast_scan 1D and 2D
• Added digitizer configuring by M3202A_Uploader.

Changed

• Default channel offset is None to allow configuration outside of pulselib

Fixed

• Scaling of custom pulses with virtual gates. Custom function now always called with amplitude of original pulse.

[1.4.0] - 2022-05-17

Changed

• Renamed Tektronix backend 'Tektronix_5014' after refactoring:
  • Faster and allow fast switching between multiple uploaded sequences.
  • Amplitude output has been corrected. It is 2x previous output. Correct attenuation per channel!!
  • Use sequence.play(release=False) to call play multiple times after a single upload.
  • Use infinite looping when n_rep > 65535

Added

• Added sequencer.repetition_aligment to align the duration of the sequence with an external clock or signal frequency. (currently only implemented for Tektronix)
• Added argument reset_time to wait()
• Several pages of documentation (not finished yet..)

[1.3.5] - 2022-03-29

Fixed

• Error when rendering section with low sample rate extends into segment with high sample rate.

[1.3.4] - 2022-03-23

Improved

• QuantumSequencer use waveform with low sample rate for long DC compensation pulse.

[1.3.3] - 2022-03-14

Fixed

• QuantumSequencer bugs in 1.3.2

[1.3.2] - 2022-03-14

Fixed

• Fixed long wait (> 160 ms) for QuantumSequencer

Added

• Added attribute 'values' to sequence loop parameters

[1.3.1] - 2022-03-07

Fixed

• Fixed rendering of segments with different sample rates
• Rendering of conditional segments with looping

[1.3.0] - 2022-02-22

Added

• IQ correction of phase, amplitude and offset: add_channel_offset, set_qubit_correction_phase, set_qubit_correction_gain
• New interface from hardware class to pulselib: set_channel_attenuations and add_virtual_matrix
• Virtual matrix on top of virtual gates
• Added hw schedule for UHFLI with Tektronix
• Improved release_awg_memory (for Keysight AWG)

Removed

• pulse.add_channel_compenstation_limit. Correct method is add_channel_compensation_limit

Fixed

• loops with t_measurement in HVI variable.
• release_awg_memory() for Keysight

[1.2.0] - 2021-11-11

First labeled release. Start of dev branch and change logging.