This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

   This insures the common exception handler will not be
   re-entered. The handler does not support nested interrupts
   and the interrupt stack pointer and context will be overwritten
   resulting in hard to debug hardfaults.

   If all the priorities are equal the NVIC prevents the
   preemption. The startup code defaults all the priorities
   to the same value 128.

   This change safeguards in 2 ways 1) By disabling
   CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
   This will insure that all HW interrupts are at the same
   priority.

   2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
   exception will disable any interrupts during interrupt
   processing.

This is because NuttX uses a different assignment for variables.

Can be reverted if needed later on...

Replaced with the more generic serial config params.

rc.mavlink contains automatic transition support that can be removed after
the next release.

Replaced with the more general serial config params.

It doesn't really fit to test/, and also no other existing place.

And:
- return correct return code in SF0X::init()
- remove unneeded SF0X::probe()

Not required anymore.