PositionControl: update comment about the order of thrust and position

mc_pos_control: reset setpoints to NAN if required

MulticopterLandDetector: consider to be landed if vehicle is not armed

mc_pos_control: initialize landing struct with landed

mc-pos-ctrl: adjust thrust-setpoint and yaw during ground-contact/maybe-landed without capturing
that information within vehicle-local-position-setpoint topic because that information
does not belong to user intention

PositionControl: set local position/velocity setpoint to NAN if not used in the control pipeline

mc-pos-ctrl: Fill vehicle_local_position_setpoint_s structure as follow:
The message contains setpoints where each type of setpoint is either the input to the PositionController
or was generated by the PositionController and therefore corresponds to the PositioControl internal states (states that were generated by P-PID).
Example:
If the desired setpoint is position-setpoint, _local_pos_sp will contain
position-, velocity- and thrust-setpoint where the velocity- and thrust-setpoint were generated by the PositionControlller.
If the desired setpoint has a velocity-setpoint only, then _local_pos_sp will contain valid velocity- and thrust-setpoint, but the position-setpoint
will remain NAN. Given that the PositionController cannot generate a position-setpoint, this type of setpoint is always equal to the input to the
PositionController.

mc_pos_control: switch to designated initializer for landed

It's less error prone because it produces an error on every discrepancy.