Remove LPE config

Makefile

@@ -155,9 +155,6 @@ px4-stm32f4discovery_default:
 px4fmu-v2_ekf2:
 	$(call cmake-build,nuttx_px4fmu-v2_ekf2)
 
-px4fmu-v2_lpe:
-	$(call cmake-build,nuttx_px4fmu-v2_lpe)
-
 mindpx-v2_default:
 	$(call cmake-build,nuttx_mindpx-v2_default)
 
@@ -251,7 +248,6 @@ checks_tests: \
 	check_px4fmu-v2_test
 
 checks_alts: \
-	check_px4fmu-v2_lpe \
 	check_px4fmu-v2_ekf2 \
 
 checks_uavcan: \

cmake/configs/nuttx_px4fmu-v2_lpe.cmake

-include(nuttx/px4_impl_nuttx)
-
-set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/cmake/toolchains/Toolchain-arm-none-eabi.cmake)
-
-set(config_uavcan_num_ifaces 2)
-
-set(config_module_list
-	#
-	# Board support modules
-	#
-	drivers/device
-	drivers/stm32
-	drivers/stm32/adc
-	drivers/stm32/tone_alarm
-	drivers/led
-	drivers/px4fmu
-	drivers/px4io
-	drivers/boards/px4fmu-v2
-	drivers/rgbled
-	drivers/mpu6000
-	drivers/mpu9250
-	drivers/lsm303d
-	drivers/l3gd20
-	drivers/hmc5883
-	drivers/ms5611
-	#drivers/mb12xx
-	drivers/srf02
-	drivers/sf0x
-	drivers/ll40ls
-	drivers/trone
-	drivers/gps
-	drivers/pwm_out_sim
-	#drivers/hott
-	#drivers/hott/hott_telemetry
-	#drivers/hott/hott_sensors
-	drivers/blinkm
-	drivers/airspeed
-	drivers/ets_airspeed
-	drivers/meas_airspeed
-	drivers/frsky_telemetry
-	modules/sensors
-	#drivers/mkblctrl
-	drivers/px4flow
-	#drivers/oreoled
-	drivers/gimbal
-	drivers/pwm_input
-	drivers/camera_trigger
-	drivers/bst
-	drivers/snapdragon_rc_pwm
-	drivers/lis3mdl
-	drivers/bmi160
-
-	#
-	# System commands
-	#
-	systemcmds/bl_update
-	systemcmds/mixer
-	systemcmds/param
-	systemcmds/perf
-	systemcmds/pwm
-	systemcmds/esc_calib
-	systemcmds/reboot
-	#systemcmds/topic_listener
-	systemcmds/top
-	systemcmds/config
-	systemcmds/nshterm
-	systemcmds/mtd
-	systemcmds/dumpfile
-	systemcmds/ver
-
-	#
-	# General system control
-	#
-	modules/commander
-	modules/load_mon
-	modules/navigator
-	modules/mavlink
-	modules/gpio_led
-	modules/uavcan
-	modules/land_detector
-
-	#
-	# Estimation modules (EKF/ SO3 / other filters)
-	#
-	modules/attitude_estimator_q
-	#modules/ekf_att_pos_estimator
-	#modules/position_estimator_inav
-	modules/local_position_estimator
-
-	#
-	# Vehicle Control
-	#
-	# modules/segway # XXX Needs GCC 4.7 fix
-	modules/fw_pos_control_l1
-	modules/fw_att_control
-	modules/mc_att_control
-	modules/mc_pos_control
-	modules/vtol_att_control
-
-	#
-	# Logging
-	#
-	modules/logger
-	modules/sdlog2
-
-	#
-	# Library modules
-	#
-	modules/param
-	modules/systemlib
-	modules/systemlib/mixer
-	modules/uORB
-	modules/dataman
-
-	#
-	# Libraries
-	#
-	lib/controllib
-	lib/mathlib
-	lib/mathlib/math/filter
-	lib/ecl
-	lib/external_lgpl
-	lib/geo
-	lib/geo_lookup
-	lib/conversion
-	lib/launchdetection
-	lib/terrain_estimation
-	lib/runway_takeoff
-	lib/tailsitter_recovery
-	lib/DriverFramework/framework
-	platforms/nuttx
-
-	# had to add for cmake, not sure why wasn't in original config
-	platforms/common 
-	platforms/nuttx/px4_layer
-
-	#
-	# OBC challenge
-	#
-	#modules/bottle_drop
-
-	#
-	# Rover apps
-	#
-	#examples/rover_steering_control
-
-	#
-	# Demo apps
-	#
-	#examples/math_demo
-	# Tutorial code from
-	# https://px4.io/dev/px4_simple_app
-	#examples/px4_simple_app
-
-	# Tutorial code from
-	# https://px4.io/dev/daemon
-	#examples/px4_daemon_app
-
-	# Tutorial code from
-	# https://px4.io/dev/debug_values
-	#examples/px4_mavlink_debug
-
-	# Tutorial code from
-	# https://px4.io/dev/example_fixedwing_control
-	#examples/fixedwing_control
-
-	# Hardware test
-	#examples/hwtest
-)
-
-set(config_extra_builtin_cmds
-	serdis
-	sercon
-	)
-
-set(config_io_board
-	px4io-v2
-	)
-
-set(config_extra_libs
-	uavcan
-	uavcan_stm32_driver
-	)
-
-set(config_io_extra_libs
-	)
-
-add_custom_target(sercon)
-set_target_properties(sercon PROPERTIES
-	PRIORITY "SCHED_PRIORITY_DEFAULT"
-	MAIN "sercon" STACK_MAIN "2048")
-
-add_custom_target(serdis)
-set_target_properties(serdis PROPERTIES
-	PRIORITY "SCHED_PRIORITY_DEFAULT"
-	MAIN "serdis" STACK_MAIN "2048")