ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class.

 - starts requirements for PX4 modules (hrt, param, etc)

This updating of the driver setting is for EMI issue with GPS and FCC.
   With this setting the clock is sinusoidal

   N.B. sd_bench fails on SanDISK HC, but Passes SanDISK **HC1** and
   Kingston cards.

   ****Use HC1 or Kingston cards!***

   Testing done on SanDISK HC all failed sd_bench with Drive/Slew other
   than default and _PIN_OUTPUT_FAST|_PIN_OUTPUT_HIGHDRIVE

	_PIN_OUTPUT_FAST|_PIN_OUTPUT_HIGHDRIVE    Square noisy, pass SanDISK HC
        _PIN_OUTPUT_FAST|_PIN_OUTPUT_LOWDRIVE     Square noisy, pass SanDISK HC
        _PIN_OUTPUT_HIGHDRIVE|_PIN_OUTPUT_SLOW    sinusoidal fail SanDISK HC, pass SanDISK HC1
        _PIN_OUTPUT_LOWDRIVE |_PIN_OUTPUT_SLOW    sinusoidal fail SanDISK HC, pass SanDISK HC1
                              _PIN_OUTPUT_SLOW    sinusoidal fail SanDISK HC, pass SanDISK HC1

 - explicitly set TOOLCHAIN on all NuttX targets